AlSi10Mg Die Casting Bulldozer Lighting Parts

This part is using in Bulldozer,the raw material of this Machinery Parts is AlSi10Mg.The main processes of this Bulldozer Components are die casting,CNC Turning,Shot Blasting,Spray Coating,Assembling.In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.

Forming or self-cutting fasteners
This type of assembly utilizes hard steel fasteners that anchor to the die cast part itself by either forming to or cutting into the part as they are installed. Die cast alloys are typically relatively soft and readily accept these types of fasteners.
These types of fasteners include:
• Spring clips
• Stamped nuts
• Self-tapping screws
• Thread-forming screws

It is possible to cast external threads on cylindrical features under specific circumstances. Threads can be formed across the parting line of the die with either slides or solid components. Flash can get left in threads with slides, or made across parting lines, which can be quite difficult to remove. If the flash isn’t severe, it can be removed through the process of the bolt and nut installation. Many manufacturers prefer casting flats at the root of the thread on the parting line so that the flash forms on the flats making it very easy to remove.